Honda key and remote programming instructions

 

Honda Key remote transmitter added or replaced

Honda

Model and Year

Pilot                               2006-2008
Odyssey (LX Models)  2005-2013
Odyssey(except LX)    2011-2013
Fit                                   2007-2008
Accord                           2003-2007
CR-V                              2005-2006

 

Honda key remote transmitter

Honda key remote transmitter

 

Key operation:

  • Pressing key remote transmitter LOCK button once activates alarm and central locking.
  • Pressing key remote transmitter UNLOCK button once deactivates alarm (if fitted) and unlocks driver’s door only.
  • Pressing key remote transmitter UNLOCK button twice within 5 seconds unlocks all doors.
  • Pressing key remote transmitter PANIC button for more than 2 second activates panic alarm.
  • Pressing key remote transmitter TRUNK release button for 2 seconds activates trunk release.
  • Pressing any of the key remote transmitter buttons deactivates panic alarm.
    If vehicle unlocked and doors not opened within 30 seconds, locks are reactivated.

How:

Obtain all keys remote transmitters.

Ensure doors, trunk / tailgate and hood are closed and unlocked.

Switch ignition ON.

Proceed as follows:

  • Within 4 seconds: Press LOCK button or UNLUCK button of first key remote transmitter.
  • Within 4 seconds: Switch ignition OFF.
  • Within 4 seconds: Switch ignition ON.

Repeat procedure above twice.

  • Within 4 seconds Press LOCK button or UNLUCK button of first key remote transmitter.

System should now lock and unlock vehicle to indicate programmind mode activated

  • Within 10 seconds press LOCK button or UNLOCK button of first key remote transmitter, allowing doors to lock and unlock once
  • Press LOCK button or UNLOCK button of each remaining key remote transmitter, allowing doors to lock and unlock once as each key remote transmitter is programmed.
  • Switch ignition OFF.
  • Remove key.

Wait 10 seconds.
Check operation of all programmed key remote transmitters.

Immobilizer can only be programmed using diagnostic equipment.

 

Remote transmitter added or replaced

Honda

Model and Year

Odyssey(except LX)   2005-2010
Odyssey                      1999-2004
Insight                          2000-2007
Element                        2004-2008
CR-V                            1998-2004
Accord SE                             1997
Civic                              1999-2005
Pilot                              2002-2005
Accord                          1998-2002
S2000                           2000-2008

 

Honda remote transmitter

Remote Transmitter

 

How:

Obtain all remote transmitters.

Ensure doors, trunk / tailgate and hood are closed and unlocked.

Switch ignition ON.

Proceed as follows:

  • Within 4 seconds: Press LOCK button or UNLUCK button of first remote transmitter.
  • Within 4 seconds: Switch ignition OFF.
  • Within 4 seconds: Switch ignition ON.

Repeat procedure above twice.

  • Within 4 seconds Press LOCK button or UNLUCK button of first remote transmitter.

System should now lock and unlock vehicle to indicate programmind mode activated

  • Within 10 seconds press LOCK button or UNLOCK button of first remote transmitter, allowing doors to lock and unlock once
  • Press LOCK button or UNLOCK button of each remaining remote transmitter, allowing doors to lock and unlock once as each remote transmitter is programmed.
  • Switch ignition OFF.
  • Remove key.

Wait 10 seconds.
Check operation of all programmed remote transmitters.

 

Remote Transmitters can only be programmed using diagnostic equipment

Honda

Model and Year

S2000                              2009
Element                   2009-2011

 

Key Remote Transmitters can only be programmed using diagnostic equipment

Honda

Model and Year

Ridgeline                     2006-2012
Pilot (LX Models)        2009-2013
Pilot (except LX)         2009-2013
CR-V                           2007-2012
CR-Z                           2011-2012
Fit                                2009-2012
Insight                          2010-2012
Accord                         2008-2012
Civic                             2006-2012

 

We Provide Locksmith Services to all Broward County Cities:

Coconut Creek, Coral Springs, Dania, Davie, Deerfield Beach, Everglades Parkway, Fort Lauderdale, Hallandale, Hollywood, Lauderdale Lakes, Lauderhill, Pembroke Pines, Plantation, Pompano Beach, Miramar, Southwest Ranches, Sunrise, Tamarac, West Park.

Locksmith Shop Hours of Operation:
Monday thru Friday from 8:30 am to 7:00 pm
Saturday from 9:30 am to 5:00 pm
Sunday Closed

Payment methods available to you:
Cash, Check, Visa, Mastercard, American Express, Discover

Currencies accepted: USD

Automotive and Commercial Locksmith
6105 Johnson Street
Hollywood, FL 33024
Phone: 1.954.347.9566

 

If the information in this post was useful to you spread the word and help others find it; share

Chrysler Dodge Jeep Key and Remote Control Programming Instructions

A Chrysler, Dodge, Jeep Transponder Key once programmed into a one car cannot be programmed to work any other car.

The transponder code identification is learned by the Sentry Key Immobilizer Module during programming. The Sentry Key Immobilizer Module sends the “Secret Code” to the transponder key and is retained by the transponder key during programming. After programming of the transponder key identification to the Sentry Key Immobilizer Module and the Secret Code is exchanged, the Sentry Key Immobilizer Module will ask for the transponder identification and the Secret Code every time the key is turned to ON or START.

No Emergency “Start” procedures for Chrysler, Dodge, Jeep vehicles.

 Key Operation and Programming

Remote alarm / central locking System Operation

  • Pressing key LOCK button activates alarm and central locking.
  • Pressing key UNLOCK button once deactivates alarm system and unlocks driver’s door.
  • Pressing key UNLOCK button twice within 5 seconds deactivates alarm system and unlocks all doors and trunk.
  • Pressing trunk lid button twice opens trunk lid.
  • System will automatically lock all doors when vehicle is driven above 15 mph.
  • Additional functions can be set to respond to the transmitter.

Programming When

  • Key transmitter added or replaced.

How

  • Key transmitter is programmed during immobilizer programming procedure.
  • If none available key transmitters can only be programmed using diagnostic equipment.
Immobilizer System Operation
  • Switch ignition ON.
  • Immobilizer warning lamp illuminates for approximately 3 seconds.

Programming When

  • Keys added or replaced.

How:

NOTE: Two programmed key transmitters must be available for the following procedure to operate. If none available key transmitters can only be programmed using diagnostic equipment.

  • Insert first programmed key into ignition switch.
  • Switch ignition ON for at least 3 seconds but no longer than 15 seconds.
  • Turn ignition OFF and remove key.
  • Withing 15 seconds insert second programmed key into ignition switch and turn ignition ON.
  • After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will flash.
  • Turn ignition OFF and remove second programmed key.
  • Within 60 seconds insert non programmed key into ignition switch and turn ignition ON.
  • After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will illuminate for 3 seconds.
  • Switch ignition OFF.
  • Remove Key.

Check operation of programmed key transmitter. Repeat procedure for additional key transmitters if required.

Key Transmitter Example:

Chrysler Key and Remote control integrated

Programming When
  • Remote transmitter added or replaced.
How:
NOTE: One programmed Remote transmitters must be available for the following procedure to operate.
  • Obtain all remote transmitters.
NOTE: Any existing remote transmitters not used during programming will become inoperative.
  • Switch ignition ON.
Using a programmed remote transmitter proceed as follows.
  • Press and hold remote transmitter UNLOCK button.
  • After holding the UNLOCK button for at least 4 seconds but no longer than 10 seconds, press remote transmitterPANIC button for at least 1 second and release both buttons.
  • Ensure acoustic signal is emitted indicating programming mode active.
  • Within 30 seconds carry out the following procedure for each remote transmitter (including previously programmed remote remote transmitter)
  • Press any button of each remote transmitter to be programmed.
  • Ensure acoustic signal is emitted after each remote transmitter operation.
  • Programming must be completed within 30 seconds.
  • Switch ignition OFF or wait 32 seconds to exit programming mode.

Ensure final acoustic signal is emitted. Replacement remote transmitters can also be programmed using diagnostic equipment.

Remote Transmitter Example:

Chrysler Dodge Jeep Remote control, fob

Chrysler Dodge Jeep Transmitter

 

Chrysler

Model and Year

200                                2011-2012
Aspen/Hybrid                2007-2009
300                                2005-2007
300c                              2005-2007
300m                                      2004
Concorde                               2004
Cirrus                            1995-2000
Sebring Convertible      2001-2007
Sebring Sedan              2001-2006
Pacifica                          2003-2008
Prowler                          2000-2002
Town & Country            2000-2005
Voyager                         2000-2003
PT Cruiser                     2006-2010
Town & Country             2006-2007
Sebring                           2007-2010

 

 

Dodge

Model and Year

Avenger                    2008–2010
Avenger                    2011–2012
Caliber                       2007-2012
Caravan                              2007
Nitro                          2007–2011
Caravan                     2000-2005
Grand Caravan         2000–2005
Charger                      2006-2007
Magnum                     2005–2007
Dakota                       2000-2004
Dakota                      2005–2009
Dakota                       2010-2011
Durango/Hybrid                  2009
Durango/Hybrid         2004-2008
Intrepid                      1998–2004
Neon                          2000-2006
Ram Truck                2003–2008
Stratus Sedan            2001-2006
Viper                          2005–2009

 

 

Jeep

Model and Year

Commander                2006–2007
Grand Cherokee          2005-2007
Cherokee                    1998–2002
Grand Cherokee          1998-2004
Wrangler                      1998–2006
Compass                     2007-2012
Liberty                          2006–2012
Patriot                           2007-2012
Wrangler                       2007–2012
Liberty                           2002-2005

 

 

Programming When

  • Keys added or replaced.”FOBIK” Remotes (FOB Intregated Key)

How:

NOTE: Two programmed key transmitters must be available for the following procedure to operate.

  • Obtain all keys.
  • Using first programmed key turn ignition switch ON and wait 3 seconds, return to OFF position and remove key.
NOTE: First and second programmed key operations MUST be performed within 15 seconds.
  • Insert second programmed key and switch ignition ON.
  • Wait approximately 10 seconds.
  • Ensure immobilizer warning lamp begins to flash and an acoustic signal is emitted.
  • Switch ignition OFF and remove key.
  • Within 50 seconds, insert new key and switch ignition ON.
  • Wait approximately 10 seconds.
  • Ensure acoustic signal is emitted and immobilizer warning lamp remains illuminated for 3 seconds indicating programming completed.

For each additional key repeat procedure starting from the beginning.
Replacement keys can also be programmed using diagnostic equipment.

“FOBIK” Remotes Example:

Remote key Transmitter

“FOBIK” Remotes (FOB Intregated Key)

 

Chrysler

Model and Year

300                          2008–2009
Town & Country                2008

 

 

Dodge

Model and Year

Challenger                    2008–2009
Charger                        2008–2009
Magnum                                 2008
Grand Caravan            2008–2010
Journey                        2009–2010

 

 

Jeep

Model and Year

Commander                 2008–2009
Grand Cherokee           2008-2009

 

 

We Provide Locksmith Services to all Broward County Cities:

Coconut Creek, Coral Springs, Dania, Davie, Deerfield Beach, Everglades Parkway, Fort Lauderdale, Hallandale, Hollywood, Lauderdale Lakes, Lauderhill, Pembroke Pines, Plantation, Pompano Beach, Miramar, Southwest Ranches, Sunrise, Tamarac, West Park.

Locksmith Shop Hours of Operation:
Monday thru Friday from 8:30 am to 7:00 pm
Saturday from 9:30 am to 5:00 pm
Sunday Closed

Payment methods available to you:
Cash, Check, Visa, Mastercard, American Express, Discover

Currencies accepted: USD

Automotive and Commercial Locksmith
6105 Johnson Street
Hollywood, FL 33024
Phone: 1.954.347.9566

 

If the information in this post was useful to you spread the word and help others find it; share

Automotive and Commercial Locksmith new Home

Automotive and Commercial Locksmith is now Located at 6105 Johnson Street, Hollywood, Florida, 33024.You can expect the same caring service you’ve come to know.

Automotive and Commercial Locksmith Store

Welcome to our Locksmith Shop

This is a premier locksmith company located in Hollywood, Florida. As a family owned and operated business in Hollywood, Florida, Automotive and Commercial Locksmith has been servicing the community for over seven years and one of the pioneering leaders in the automotive locksmith industry.

Locksmith Services offer: Duplicated keys, lockout, locks, re key, ignition locks, car keys, transponder keys, motorcycle keys, access control, medeco locks, Remote control, Safes and Vaults.

Brand offer: Medeco, Kwikset, Schlage, Yale, LSDA, Von Duprin, Corbin Russwin, ASSA ABLOY, Kaba, Master Lock, La Gard, LCN, Gardall, Falcon, Dor-O-Matic, Detex, Baron, Arrow, Adams Rite.

We Provide Locksmith Services to all Broward County Cities:

Coconut Creek, Coral Springs, Dania, Davie, Deerfield Beach, Everglades Parkway, Fort Lauderdale, Hallandale, Hollywood, Lauderdale Lakes, Lauderhill, Pembroke Pines, Plantation, Pompano Beach, Miramar, Southwest Ranches, Sunrise, Tamarac, West Park.

Locksmith Shop Hours of Operation:
Monday thru Friday from 8:30 am to 7:00 pm
Saturday from 9:30 am to 5:00 pm
Sunday Closed

Payment methods available to you:
Cash, Check, Visa, Mastercard, American Express, Discover

Currencies accepted: USD

Automotive and Commercial Locksmith
6105 Johnson Street
Hollywood, FL 33024
Phone: 1.954.347.9566

 

If the information in this post was useful to you spread the word and help others find it; share

Chevrolet Keys

The original factory installed anti theft system used on GM passenger cars beginning in 1986 is known as VATS (Vehicle Anti Theft System), also got a new name, Passkey (Personalized Automobile Security System). Both names refer to the same system. The name change was made strictly for marking reasons.

This revolutionary system was the first factory standard electronic anti theft system ever offered on production vehicles. The system was so successful that when it was first installed on the 1986 Chevrolet Corvette, withing 3 years, Corvette thefts had dropped by over 50%. With results like that, it is not surprising that in 1989 General Motors began expanding VATS to other vehicles. By 1993 model year, over 50% of the cars produced by General Motors were equipped with VATS.

KeysKeys

Buick

Model and Years with single sided style key

Le Sabre                1992–1999
Park Avenue          1991–1996
Reatta                    1990–1991
Riviera                   1990–1993
Regal                     1994–1997
Road Master         1994–1996

Model and Years with double sided style key

Century                   1997–2005
Riviera                    1995–1999
Regal                      1997–2005

 

Cadillac

Model and Years with single sided style key

Allante                  1987–1993
Brougham             1993–1996
Concours             1990–1999
De Ville                 1990–1999
El Dorado             1989–2002
Fleetwood            1993–1996
Seville                   1989–1997

 

Chevrolet

Model and Years with single sided style key

Camaro,Z28       1989–2002
Caprice               1995–1996
Corvette              1986–1996
Impala                 1995–1996
Lumina                1994–2000
Monte Carlo        1994–1999

Model and Years with double sided style key

Corvette              1997–2004

 

VATS / PASSKEY SYSTEM

The heart of the VATS system is a resistor pellet embedded in the shank of the ignition key. Each VATS key will have one of fifteen different resistor values. When the VATS key is inserted into the ignition switch, the resistor pellet is positioned between a pair of contacts located inside the ignition lock. Each time the lock is turned to the ON position, the VATS control module routes an electric current through the resistor pellet and determines the value of the resistor.If the value of the resistor  pellet in the key matches the value stored in the computer’s memory, the computer allows the car to start.

If the value on the resistor pellet does not match the value stored in memory, the car will not start, and a timer will prevent the car from starting, even with the correct key, until a predetermined penalty period has elapsed.

 

VATS Resistor Value (Ohms)

  • # 1 VATS Key Resistor Value 0.402 Ohms Key Blank Number B62P1
  • # 2 VATS Key Resistor Value 0.523 Ohms Key Blank Number B62P2/B82P2
  • # 3 VATS Key Resistor Value 0.681 Ohms Key Blank Number B62P3/B82P3
  • # 4 VATS Key Resistor Value 0.887 Ohms Key Blank Number B62P4/B82P4
  • # 5 VATS Key Resistor Value 1.130 Ohms Key Blank Number B62P5/B82P5
  • # 6 VATS Key Resistor Value 1.470 Ohms Key Blank Number B62P6/B82P6
  • # 7 VATS Key Resistor Value 1.870 Ohms Key Blank Number B62P7/B82P7
  • # 8 VATS Key Resistor Value 2.370 Ohms Key Blank Number B62P8/B82P8
  • # 9 VATS Key Resistor Value 3.010 Ohms Key Blank Number B62P9/B82P9
  • # 10VATS Key Resistor Value 3.740 Ohms Key Blank Number B62P10/B82P10
  • # 11 VATS Key Resistor Value 4.750 Ohms Key Blank Number B62P11/B82P11
  • # 12 VATS Key Resistor Value 6.040 Ohms Key Blank Number B62P12/B82P12
  • # 13 VATS Key Resistor Value 7.500 Ohms Key Blank Number B62P13/B82P13
  • # 14 VATS Key Resistor Value 9.530 Ohms Key Blank Number B62P14/B82P14
  • # 15 VATS Key Resistor Value 11.801 Ohms Key Blank Number B62P15/B82P15

 

 

We Provide Locksmith Services to all Broward County Cities:

Coconut Creek, Coral Springs, Dania, Davie, Deerfield Beach, Everglades Parkway, Fort Lauderdale, Hallandale, Hollywood, Lauderdale Lakes, Lauderhill, Pembroke Pines, Plantation, Pompano Beach, Miramar, Southwest Ranches, Sunrise, Tamarac, West Park.

Locksmith Shop Hours of Operation:
Monday thru Friday from 8:30 am to 7:00 pm
Saturday from 9:30 am to 5:00 pm
Sunday Closed

Payment methods available to you:
Cash, Check, Visa, Mastercard, American Express, Discover

Currencies accepted: USD

Automotive and Commercial Locksmith
6105 Johnson Street
Hollywood, FL 33024
Phone: 1.954.347.9566

 

If the information in this post was useful to you spread the word and help others find it; share